Calibration on site

This trailer is built to calibrate or (re) approve your onboard weighing system on site. You do not have to drive for a calibration or inspection, resulting in maximum uptime of your personnel and vehicles far.


- Calibration Trailer, mainly used for calibration of total weighing system on

  refuse truck

- Can be used at any location in Europe

- For use in all weather conditions

- Simulation tilt to 10% slope


How does it work?

After appointment, the Calibration Trailer comes to your location. The trailer is stamped, the tilt automatically extended in width and height and the runway is extended.

The back of the refuse truck is opened and the pusher pushed forward. Then the refuse truck gets driven backwards in the trailer. The crane will automatically come to the right place in the body.

During a calibration or (re) certification is the weighing system in increments charged with certified weights. Part of the calibration is the tilt test. With outriggers under the semi-trailer can be a proper slope to 10%. After calibration, a certificate drawn. The front of the semi-trailer can be opened to place. Weights outside of the semi-trailer These weights can be used for the calibration of crane weighing systems or other mobile weighing systems.

Specifications

Needed: Surface of 10 x 30 meters, 8.5 meters free height

- Power (3 phase + neutral)

- Extendable in 4 minutes
- Calibrations even in bad weather
Equipped with 14 tons calibration weights
- Tilting to 10% possible
Can be used throughout Europe


For more information or making an appointment contact us directly!



Watch the video